High-Precision Universal 4-Channel LED Controllers with External Triggers and 0.1mA Current Resolution Description：

Datasheet

Mightex has developed a series of computer-controllable, multi-channel, universal LED drivers, which can be used to drive any type of LED in any of the three (3) modes: ‘NORMAL’ (or ‘constant current’), ‘STROBE’, and/or external ‘TRIGGER’ mode. Each unit comes with PC-based software with a user-friendly GUI, which enables users to drive LEDs without the need to write any code. In addition, a powerful SDK is provided, in order for users to write their own software and to integrate Mightex’s LED drivers into their own systems. Furthermore, the drivers have a built-in security feature, allowing users to limit LED driving current and voltage.

This datasheet covers four (4) product series (i.e. FA, FV, XA and XV series) of High-Precision Universal 4-Channel LED Controllers with External Triggers and 0.1mA Current Resolution, which currently includes 4 models in total. All FA/FV/XA/XV LED controllers have 0.1mA current resolution, and a maximum current of 100mA in DC mode and 350mA in pulse mode.

Features:

Driving current up to 100mA in DC mode and up to 350mA in pulse mode, with over current protection

Current resolution 0.1mA

Computer controllable

USB and RS232 interfaces

Universal – suitable for any LED

Capable of driving variable loads

User friendly application software with GUI

SDK and Rich RS232 command set included for custom applications

Normal, Strobe and Trigger mode for every channel

Programmable constant current, pulse-width modulation and/or arbitrary waveform

Up to 23.5V output voltage for each channel Programmable rising or falling edge external trigger

Built-in non-volatile memory, can be used without a PC

Applications:

Machine vision

Displays

Microscopy

Semiconductor equipment

Testing instruments

Medical instruments

Lighting

Specifications

Notes: 1. Maximum Output Voltage is 0.5V less than the Power Supply Input Voltage. For instance, with a Power Supply Input Voltage of Vdc = 24V, the Maximum Output Voltage Vmax would be Vdc – 0.5V = 23.5V.
2. Each output channel can be individually configured to work in one of the following three (3) modes, controlled through a PC-based software with GUI. In all three modes, overdrive current limit can be set:
Normal: Constant current output at any value from 0mA to 100mA with 12-bit resolution.
Trigger: External trigger signal could be used to turn on each individual channel, generating driving current with any user-defined waveform. Alternatively, each output channel can work under the “FOLLOWER” mode, in which the current output follows the waveform of the trigger input; and
Strobe: Internal Strobe Generator generates frequencies as high as 25KHz. The strobe signal (i.e. current levels, duty cycle and strobe frequency) can be set through software. For AA and AV series, the strobe signal can be a user-defined arbitrary waveform with 128 data points.
3. Arbitrary Waveform. Using the included application software or SDK or RS232 command set, users may define any arbitrary waveform using 128 data points.

TIMING SPECIFICATION: