Instrument Expert
Original factory packaging
Service Hotline：
(+86)010-52867771
Instrument Expert
Original factory packaging
Service Hotline：
(+86)010-52867771
Updated:2025-03-13
Views:1353
WeChat
QQ
Online Service
User's Manual
The IS6-C-VIS is a 6” integrating spheres (5.3” inside) with a Silicon detector for use with collimated (C) beams. The IS6-C-VIS comes with a VIS detector, is calibrated from 400 to 1100nm and can measure up to 30W.
| Aperture | ?25mm |
| Spectral Range | 400-1100nm |
| Power Range | 20μW-30W |
| Dimensions | ?154 (mm) |
| Max Pulse Energy | 5mJ |
| Max Average Power Density | 1 kw/cm2 |
| Max Average Power | 30W |
| Max Beam Divergence | ±15 deg |
| Sensitivity to Beam Size | ±1% |
Introduction to the types of power/energy laser sensors
Power and single engine energy sensor
Ophir offers two types of power sensors: photodiode sensors and thermal sensors. Photodiode sensors are used for low power from picowatts to hundreds of milliwatts and up to 3W. Thermal sensors are suitable for power ranging from a fraction of a milliwatt to several kilowatts. The thermal sensor can also measure the single transmission energy at a pulse rate of no more than one pulse every 5 seconds.
Repetitive pulse energy sensor
For higher pulse rates, Ophir has pyroelectric energy sensors capable of measuring pulse rates up to several 10KHz.
Customer Service QQ
Customer Hotline：
Technical Supports
3003988120
yiqi.com
bio-equip.com
b2bwork.baidu.com
baidu.com